Compact track loaders

Engine

122 hp

Aux flow

23 GPM

Weight

13,669 lbs

The largest compact track loader Cat builds, in the XE hydraulic package: 40 GPM at 4,496 psi, well above both the standard circuit and High Flow XPS. Land clearing and mulching outfits are the buyers.

Engine

111 hp

Aux flow

23 GPM

Weight

13,497 lbs

No Caterpillar compact track loader has ever been bigger than the 285, which tops the next-generation lineup above the 275 and competes in a new class size against machines like the Case TV620B. Its 146.6-inch bucket pin height and 4,461 lb rated operating capacity let it load full-size trucks and hoppers that no previous Cat CTL could reach, with a 285 XE variant above it for maximum power.

Also sold as the New Holland C362

Engine

114 hp

Aux flow

24.2 GPM

Weight

16,300 lbs

16,300 lbs, 114 hp, a 6,200 lb rated operating capacity and 12,907 lb of bucket breakout force make the Case TV620B the largest compact track loader on the market. It blurs the line between CTL and small dozer, aimed at contractors who want one tracked machine to lift, grade, and push like equipment two classes bigger.

Also sold as the Case TV620B

Engine

114 hp

Aux flow

24.2 GPM

Weight

16,100 lbs

At 16,100 lbs the C362 is the giant of the 300 Series - a compact track loader with a 114 hp FPT diesel, Super Boom vertical lift, and 6200 lbs of rated capacity. It competes with the largest CTLs on the market, blurring the line with small wheel loaders.

Engine

110 hp

Aux flow

23 GPM

Weight

12,764 lbs

A vegetation-management build of the 299D3 XE, carrying extra guarding and a heavier counterweight that lifts rated capacity to 4,340 lb. It is a configuration rather than a separate model, and it exists for mulching and clearing work.

Engine

122 hp

Aux flow

23 GPM

Weight

12,705 lbs

Sitting above the 275 in Cat's large-frame track loader range, the XE adds the top 40 GPM auxiliary package at 4,496 psi and a higher-output tune of the 122 hp C3.6. Land-clearing and mulching outfits are the buyers; for anything else the premium buys hydraulics you will not use.

Engine

111 hp

Aux flow

23 GPM

Weight

12,401 lbs

Cat's large-frame CTL class gets the next-generation redesign in the 275, effectively succeeding the 289D3 and 299D3 with a 111 hp C3.6TA engine and a 4,156 lb rated operating capacity. High Flow XPS pushes 34 GPM at up to 4,061 psi, and a higher-powered 275 XE variant sits above it for maximum attachment production.

Engine

111 hp

Aux flow

23.2 GPM

Weight

13,195 lbs

111 hp of Kubota diesel drives the Takeuchi TL12V2, a large-frame vertical-lift compact track loader. It's one of the highest-capacity CTLs available, prized for its lift performance, durability, and value from the CTL pioneer.

Engine

103.5 hp

Aux flow

41 GPM

Weight

11,570 lbs

Highest-capacity track loader Yanmar sells: the forestry-package TL100VP, rated 4,100 lb against the standard machine's 3,500, with 41 GPM high flow standard and 20-inch tracks. Cab-only and announced in August 2026, it is built for mulching and land clearing rather than as a general loader.

Engine

118 hp

Aux flow

25 GPM

Weight

12,300 lbs

With no G-Series predecessor behind it, the 335 P-Tier arrives as the new flagship of Deere's compact track loader line, built around a 118 hp turbo Yanmar, a 4,025 lb rated operating capacity against an 11,500 lb tipping load, and an optional 44 GPM high-flow system delivering over 100 hydraulic horsepower. Standard Attachment Manager, available SmartGrade with Topcon, and an optional SG96 dozer blade position it as a do-everything production machine at the top of the class.

Engine

109 hp

Aux flow

24 GPM

Weight

13,000 lbs

The JCB 4TS-8T is the most powerful Teleskid ever built, launched in April 2026 with a 109 hp 4.4L EcoMax engine and a telescopic single-arm PowerBoom that reaches a 15-foot hinge pin height - unmatched by any compact track loader. It lifts 3,999 lbs, reaches over 8 feet forward, digs 3 feet below grade, and runs up to 42.3 GPM of Super Flow hydraulics.

Engine

109 hp

Aux flow

24 GPM

Weight

12,544 lbs

JCB's largest and most powerful compact track loader ever, the 400T launched in April 2026 to break into the 100-plus horsepower class. A 109 hp 4.4L EcoMax diesel with no DPF, a 3,994 lb rated capacity, and up to 42.3 GPM of Super Flow hydraulics make it a high-production dirt and forestry machine built around the signature single-arm PowerBoom and side-door entry.

Engine

115 hp

Aux flow

23 GPM

Weight

12,083 lbs

115 hp from the 3.4L engine and 3,925 lb of rated capacity at 35% of tipping load mark the second generation of Bobcat's flagship compact track loader. The T86-2 keeps the T86's standard/high-flow/super-flow hydraulic options while adding the -2 platform's redesigned electrical system, 8-inch touchscreen, drive modes, and available Bobcat Sense object detection.

Engine

108 hp

Aux flow

25 GPM

Weight

12,183 lbs

An 8% power bump to 108.5 hp, a 3,850 lb rated operating capacity against an 11,000 lb tipping load, and an optional 44 GPM high-flow system separate the 333 P-Tier from the popular 333G it replaced in mid-2024. It's also Deere's grade-control CTL - available SmartGrade Ready with 2D or full 3D SmartGrade with Topcon - wrapped in the new one-piece pressurized P-Tier cab with touchscreen display and EH controls.

Engine

104 hp

Aux flow

23 GPM

Weight

10,555 lbs

Construction-grade flagship of Yanmar's TL-series compact track loaders, launched in late 2023, the TL100VS runs a 103.5 hp turbocharged and intercooled Yanmar diesel. Its 3,780 lb rated capacity, 11-foot hinge pin height, and 41 gpm high-flow option put it squarely against the Bobcat T76 and Cat 275 class - built at the ASV plant in Grand Rapids, Minnesota.

Engine

112.7 hp

Aux flow

45 GPM

Weight

12,322 lbs

Kubota's largest compact track loader, launched at ConExpo 2026 with 112.7 hp and a 45 GPM high-flow circuit adjustable from the cab touchscreen. It is built for land clearing and mulching contractors who would otherwise be sizing up to a dedicated forestry carrier.

Engine

74 hp

Aux flow

24 GPM

Weight

12,615 lbs

Only one compact track loader in the world carries a telescopic boom, and the JCB 3TS-8T Teleskid is it, reaching 13 feet 3 inches up, 8 feet forward, and even 3 feet below grade. Its single-arm PowerBoom design also allows a side-entry cab door, so operators never climb over an attachment to get in.

Also sold as the Manitou 3600VT

Engine

114 hp

Aux flow

25 GPM

Weight

12,161 lbs

Flagship of Gehl's track range and the largest machine the brand sells, rated 3,600 lbs at 35% of tipping load on a 12,161 lb frame. It shares the 114 hp Deutz TCD3.6 and 40 GPM high-flow option with the wheeled V360 launched beside it in September 2025.

Engine

110 hp

Aux flow

23 GPM

Weight

11,756 lbs

The outgoing D3 flagship track loader in XE trim, with the 40 GPM high-pressure circuit that the badge denotes. The next-generation 275 and 285 replace it, so it survives as dealer stock rather than as a current model.

Engine

132 hp

Aux flow

20 GPM

Weight

12,075 lbs

The ASV RT-135 is the most powerful Posi-Track loader ASV builds - a 132 hp Cummins turbo-diesel, up to 50 GPM of high flow, and a 12,000 lb frame designed to run mulching heads all day. It's a purpose-built attachment powerhouse more than a bucket machine.

Also sold as the Yanmar TL100VP

Engine

104 hp

Aux flow

23 GPM

Weight

10,835 lbs

The ASV VT-100 is the brand's large-frame vertical-lift Posi-Track loader, combining a 103.5 hp Yanmar turbo-diesel, 3,500 lb rated capacity, and 41 GPM high flow with the redesigned MAX-Series cab. It's the truck-loading, attachment-running flagship of ASV's vertical-lift line.

Engine

100 hp

Aux flow

25.1 GPM

Weight

10,785 lbs

The Wacker Neuson ST50 is the flagship of Wacker Neuson's compact track loader line, built in Menomonee Falls, Wisconsin. A 100 hp Kohler KDI 3404 diesel, 5,000 lb rated operating capacity, 10,000 lb tipping load, and 37.4 gpm high-flow option put it against the Bobcat T86 and Cat 285 at a notably lower price.

Also sold as the ASV VT-100

Engine

103.5 hp

Aux flow

23 GPM

Weight

10,345 lbs

Large-frame flagship of Yanmar's August 2026 Posi-Track range: 103.5 hp, 3,500 lb rated capacity, 18-inch tracks and 71 inches of track on the ground. It runs the same 4TNV94FHT engine as the steel-embedded TL100VS but gives up 280 lb of rated capacity for 9.3 mph travel and 4.0 psi ground pressure.

Engine

96.4 hp

Aux flow

23.8 GPM

Weight

11,929 lbs

Kubota's 96 hp track loader, replacing the SVL97-2 with a one-piece sealed cab, a 7-inch touchscreen and standard KubotaNOW telematics. It is built for contractors moving heavy material who want 3,459 lb of rated capacity and a 41.2 GPM high-flow circuit for mulchers and cold planers.

Also sold as the Manitou 3350VT

Engine

100 hp

Aux flow

25 GPM

Weight

11,839 lbs

Large-frame vertical track loader from the September 2025 launch, moving to a 100 hp Deutz TCD3.6 and 40 GPM of optional high flow. Rated 3,350 lbs at 35% of tipping load, it is built for the attachment-heavy work that smaller CTLs starve on.

Also sold as the Manitou 3200VT

Engine

114 hp

Aux flow

29 GPM

Weight

11,799 lbs

The Gehl VT320 is the only vertical-lift track loader in the Gehl line and its outright flagship, built by Manitou Group and also sold as the Manitou 3200 VT. A 114 hp Deutz turbo-diesel and a 3,201 lb rated capacity put it head-to-head with the Bobcat T870 and Cat 299D3 at a substantially lower price.

Engine

96 hp

Aux flow

23.1 GPM

Weight

11,299 lbs

Nothing in Kubota's lineup is bigger than the SVL97-2, which runs a 96 hp version of the company's own V3800 diesel. It delivers flagship-class capacity and an available 40 GPM high-flow package at a price that undercuts the Cat 299D3 and Bobcat T86 by a wide margin.

Engine

98 hp

Aux flow

25 GPM

Weight

11,914 lbs

Deere's new CTL lineup has its volume workhorse in the 331 P-Tier, the large-frame machine that replaced the 331G in mid-2024. It pairs a 98 hp turbo Yanmar with a 3,150 lb rated operating capacity (35% of a 9,000 lb tipping load) and Deere's patented vertical-lift boom, then adds a one-piece pressurized cab, EH joystick controls, 132-inch hinge pin height, and optional 39 GPM high-flow hydraulics.

Also sold as the New Holland C345

Engine

90 hp

Aux flow

24.2 GPM

Weight

10,610 lbs

A full 800 lbs of capacity separates the TV450B from the TV370B below it: 4,500 lb rated, out of a large-frame vertical-lift compact track loader with a 90 hp FPT engine. With a 9,000 lb tipping load and an available 4,000 psi enhanced high-flow package, it's built for heavy pallet work, truck loading, and demanding hydraulic attachments.

Also sold as the Case TV450B

Engine

90 hp

Aux flow

24.2 GPM

Weight

10,610 lbs

Workhorse of the 300 Series for serious loading and high-flow attachment work, the C345 is a heavy-duty compact track loader pairing a 90 hp FPT diesel with the patented Super Boom vertical lift and 4500 lbs of rated capacity.

Engine

74 hp

Aux flow

22.1 GPM

Weight

10,315 lbs

A 4,500 lb rated operating capacity and 134.8-inch hinge pin height come out of a 74.3 hp Kohler diesel with no DPF. The Wacker Neuson ST45 is a large-frame vertical-lift compact track loader built in Menomonee Falls, Wisconsin - the proven Series-II platform positioned just below the 100 hp ST50 flagship.

Engine

111 hp

Aux flow

23.3 GPM

Weight

12,590 lbs

Land clearing, forestry mulching, and hard digging are what the radial-lift version of Takeuchi's large-frame track loader is built for, rather than truck loading. The TL12R2's 111.3 hp Kubota V3800 turbo-diesel feeds an available 40.4 GPM high-flow circuit, bucket breakout tops 8,200 lbs, and the heavy 12,590 lb frame with Takeuchi's stout undercarriage keeps it planted on slopes. Where the vertical-lift TL12V2 chases lift capacity, the R2 trades reach at height for a simpler, stronger boom that attacks the ground.

Engine

74 hp

Aux flow

24 GPM

Weight

11,219 lbs

JCB slots the 300T between the 270T and the 109 hp 400T, pairing the single-arm PowerBoom and side-entry door with a 3,000 lb rated capacity on a large-platform frame. It is the biggest 74 hp track loader JCB builds, aimed at crews who want large-platform lift and a 125-inch hinge pin without stepping up to the 400T's price.

Engine

74 hp

Aux flow

23.3 GPM

Weight

9,592 lbs

An 8-inch touchscreen holding 20 operator profiles headlines the second-generation Pro version of Bobcat's large-frame compact track loader, launched at ConExpo 2026. The T76-2 carries over the 74 hp D24, 2,900 lb vertical-lift platform and 23.3 GPM standard flow while adding a redesigned electrical system, four drive modes, standard two-speed, and available Bobcat Sense detection with Bobcat View cameras.

Engine

71.5 hp

Aux flow

24.7 GPM

Weight

9,610 lbs

Wide-track version of Yanmar's mid-frame vertical-lift track loader, completing the steel-embedded TL line the brand rolled out through 2023-24. It shares the 71.5 hp turbo Yanmar diesel with the TL75VS-1C but adds a wider stance, 2,900 lb rated capacity and 5.1 psi ground pressure, built in Grand Rapids, Minnesota alongside ASV.

Engine

74 hp

Aux flow

23 GPM

Weight

10,492 lbs

Larger of the first two next-generation Cat compact track loaders, the 265 replaces both the 279D3 and 289D3. Its turbo after-cooled C2.8TA delivers a 43% torque increase over the outgoing models, and the vertical-lift arms reach a 132-inch pin height, with High Flow XPS pushing 34 GPM for demanding attachments.

Also sold as the Yanmar TL80VP

Engine

72 hp

Aux flow

24.7 GPM

Weight

8,955 lbs

The ASV VT-80-1C is the brand's big mid-frame vertical-lift Posi-Track loader, stacking a 2,800 lb rated capacity and 34.3 GPM optional high flow onto the suspended undercarriage ASV is known for. It squares up against the Kubota SVL75 and Bobcat T76 class while out-floating them all on soft ground.

Also sold as the ASV VT-80-1C

Engine

71.5 hp

Aux flow

24.7 GPM

Weight

8,955 lbs

Wide-track vertical-lift machine from Yanmar's August 2026 Posi-Track announcement: 71.5 hp, 2,800 lb rated capacity, 17.7-inch tracks and 3.9 psi ground pressure. It is the lowest-ground-pressure vertical-lift machine Yanmar builds, and the closest thing in the range to a one-machine answer for crews working on finished ground.

Engine

71.5 hp

Aux flow

34.3 GPM

Weight

9,645 lbs

Forestry-package version of the TL80VP, announced August 2026: same 71.5 hp engine and 2,800 lb rated capacity, but cab-only and with the 34.3 GPM high-flow circuit fitted as standard rather than as an option. The package is aimed at mulching and land-clearing work, where the machine spends its life running a powered head in debris.

Engine

74 hp

Aux flow

24 GPM

Weight

11,003 lbs

Visibility and entry safety no twin-arm machine can offer are the JCB 270T's argument, from the brand's signature single-arm PowerBoom and side-entry door. A torquey 4.4L JCB EcoMAX rated at 74 hp drives this large-platform vertical-lift compact track loader and its 2,723 lb rated capacity.

Also sold as the Manitou 2750VT

Engine

72 hp

Aux flow

26 GPM

Weight

10,249 lbs

Successor to the radial RT255 and the largest of Gehl's mid-range vertical track loaders, rated 2,750 lbs at 35% of tipping load. A 33 GPM high-flow option and a 129-inch lift make it the first VT machine that handles heavy attachments and high-side trucks without compromise.

Engine

107 hp

Aux flow

23.1 GPM

Weight

11,980 lbs

First of Takeuchi's new 3 Series track loaders, the TL11R3 is also the company's first with electric-over-hydraulic joystick controls. The 107.3 hp Kubota turbo-diesel drives a radial-lift boom rated at 2,735 lbs, with up to 40 GPM of high-flow auxiliary hydraulics for mulchers and planers. The EH system switches between ISO and H patterns, adds electronic self-leveling and adjustable sensitivity, and an 8-inch touchscreen with standard 270-degree rearview camera anchors a redesigned quiet cab. Takeuchi Fleet Management telematics comes standard for five years.

Also sold as the Case TV370B

Engine

74 hp

Aux flow

24 GPM

Weight

9,945 lbs

High rated capacity pairs with class-leading dump height and reach at a competitive price here. The New Holland C337 is a large-frame compact track loader with the patented Super Boom vertical lift, powered by an FPT diesel.

Also sold as the New Holland C337

Engine

74 hp

Aux flow

24.2 GPM

Weight

9,945 lbs

Skipping DEF entirely, the 74 hp FPT engine in the Case TV370B backs a 3,700 lb rated capacity in a large-frame vertical-lift compact track loader. It's the tracked sibling of the SV340B, aimed at contractors who want big-machine lift and truck-loading height without big-machine emissions plumbing.

Engine

74 hp

Aux flow

21 GPM

Weight

9,500 lbs

The 325G was Deere's best-selling mid-frame compact track loader, and the 325 P-Tier replaced it while keeping the 74 hp DEF-free Yanmar and 2,590 lb rated capacity, adding a roomier sealed cab, standard EH ISO joysticks, and optional high-flow hydraulics. It stays under the 75 hp Tier 4 threshold that avoids DEF, and the vertical lift path with a 10.5-foot hinge pin height loads tandem dump trucks cleanly - the all-around configuration that made the 325G a landscaper and rental favorite.

Engine

74 hp

Aux flow

23 GPM

Weight

9,014 lbs

Largest of Wacker Neuson's new uni-body generation of compact track loaders, the ST37 joined the line in 2024. Built in Menomonee Falls, Wisconsin, it combines a 74 hp no-DPF Kohler diesel, a 3,700 lb rated operating capacity, and just 4.3 psi ground pressure thanks to wide tracks spreading its 9,014 lb operating weight.

Engine

71.5 hp

Aux flow

21.4 GPM

Weight

9,205 lbs

First vertical-lift step in Yanmar's track loader line, launched at ConExpo 2023 and built in Grand Rapids, Minnesota alongside ASV machines. A 71.5 hp turbocharged Yanmar diesel, a torsion-axle suspended undercarriage on steel-embedded track and 2,555 lb of rated capacity at 35% of tipping load put it against the mid-frame Bobcat and Deere machines.

Engine

74 hp

Aux flow

18.8 GPM

Weight

10,270 lbs

Built heavy at over 10,000 lbs with a 74.3 hp Kubota diesel, the Takeuchi TL10V2 is a mid-frame vertical-lift compact track loader from the company that invented the CTL. It sits between the TL8 and TL12V2 for contractors who prize Takeuchi's tank-like construction and undercarriage.

Engine

74 hp

Aux flow

23 GPM

Weight

8,980 lbs

For over a decade the T650 anchored Bobcat's M-Series, and this mid-frame vertical-lift compact track loader now sells as a value-priced Classic model. With a 74 hp non-DPF diesel and 2,500 lb rated capacity, it's one of the most common CTLs on American jobsites and in rental fleets.

Engine

74 hp

Aux flow

20 GPM

Weight

9,578 lbs

Replacing the hugely popular 259D3, the Cat 255 is the first of Caterpillar's ground-up next-generation compact track loaders. The new C2.8T engine holds peak power across a wider RPM band, and versus the 259D3 it delivers 24% more rated operating capacity, 36% more tilt breakout force, and class-leading lift height in a sealed, pressurized one-piece cab.

Engine

74 hp

Aux flow

19.2 GPM

Weight

9,420 lbs

No new CTL sells better in the US than the Kubota SVL75-3, a medium-frame vertical-lift compact track loader. Powered by Kubota's own diesel, it's praised for its roomy cab, easy service access, and strong value.

Engine

74 hp

Aux flow

18.5 GPM

Weight

9,667 lbs

Launched in 2026, the JCB 250T brings the single-arm PowerBoom and side-entry door to the most contested mid-size CTL class, on a large-platform frame with a 2,526 lb rated capacity and a 125-inch hinge pin height. A 74 hp JCB EcoMAX TCAE-55 diesel with no DPF or DEF powers it, and at 10,622 lbs it sits at the heavy end of its capacity class.

Engine

74 hp

Aux flow

17.6 GPM

Weight

8,560 lbs

Bobcat's best-selling mid-frame compact track loader entered its second generation at ConExpo 2026. The T66-2 carries over the 74 hp D24 engine and 2,450 lb vertical-lift platform while adding a redesigned electrical system, an 8-inch touchscreen with infotainment, four drive modes, Machine IQ telematics, and available Bobcat Sense object detection.

Engine

90 hp

Aux flow

24.2 GPM

Weight

10,000 lbs

Nothing in Case's B-Series lineup has more radial-lift power than the TR340B, a compact track loader running a 90 hp FPT diesel. It's built for heavy earthmoving and grading with strong breakout force at a competitive price.

Also sold as the Yanmar TL75VP

Engine

72 hp

Aux flow

21.4 GPM

Weight

7,915 lbs

The ASV VT-75-1C is a mid-frame vertical-lift Posi-Track loader that succeeds the long-running RT-75, pairing a 71.5 hp Yanmar turbo-diesel with a 2,300 lb rated capacity and a 10.5-foot lift height. It brings ASV's suspended undercarriage and flotation to operators who need to load over dump truck sides.

Engine

68 hp

Aux flow

17.6 GPM

Weight

8,440 lbs

Smallest of Bobcat's Pro track loaders, with 68 hp, 2,300 lb of rated capacity on the solid undercarriage and the full Pro cab and control package. It is for operators who want the -2 platform's tech in the lightest tracked frame it comes in.

Also sold as the Manitou 2300VT

Engine

72 hp

Aux flow

23 GPM

Weight

9,191 lbs

Mid-range vertical track loader rated 2,300 lbs at 35% of tipping load, sold by the parent company as the Manitou 2300VT. It sits between the VT210 and VT275 with the same 23 GPM hydraulics as the smaller machine but more frame and capacity behind them.

Also sold as the ASV VT-75-1C

Engine

71.5 hp

Aux flow

21.4 GPM

Weight

7,915 lbs

Entry vertical-lift machine in Yanmar's August 2026 Posi-Track range, at 71.5 hp and 2,300 lb rated capacity. Same engine as the steel-embedded TL75VS-1C, on a suspended undercarriage that trades 255 lb of rated capacity for 9.1 mph travel and 4.5 psi ground pressure.

Engine

74 hp

Aux flow

24.2 GPM

Weight

9,630 lbs

Sharing the C337's frame and 101.6-inch dump height at a lower price and capacity point, the C332 is a large-frame compact track loader with the patented Super Boom vertical lift and a 74 hp FPT diesel.

Engine

74 hp

Aux flow

24.2 GPM

Weight

8,880 lbs

Wide 15.75-inch tracks, a 74 hp no-DEF FPT engine and a 3,100 lb rated capacity make the TR310B the mid-frame radial-lift workhorse of Case's B-Series compact track loader line. It's the sweet-spot machine for landscapers and general contractors who want real dirt-moving ability without stepping up to a 10,000 lb frame.

Engine

74 hp

Aux flow

19.8 GPM

Weight

8,241 lbs

Volume mid-frame model in Wacker Neuson's ST-series compact track loaders, the ST31 moved to the uni-body frame design in 2024. Built in Menomonee Falls, Wisconsin, it carries a 74 hp Kohler diesel with no DPF or DEF, a 3,100 lb rated operating capacity, and a vertical lift path with a 10-foot-8 hinge pin height.

Engine

74 hp

Aux flow

18.6 GPM

Weight

9,914 lbs

The JCB 2TS-7T is the world's only small-platform compact track loader with a telescopic boom. The extending single-arm PowerBoom reaches 12'0" of lift height and 7 feet of forward reach from a machine sized and priced against conventional mid-size CTLs, with a 74 hp no-DPF Kohler diesel and JCB's side-entry cab door.

Engine

65 hp

Aux flow

17 GPM

Weight

8,423 lbs

No compact track loader in Deere's line is smaller than the 317 P-Tier, which replaced the 317G as the small-frame vertical-lift entry point to the CTL line. At roughly 8,400 lbs it still tows behind a standard pickup, while the P-Tier update brings a roomier sealed cab, standard EH ISO joystick controls, and options like ride control and a rearview camera. The 65 hp turbo Yanmar meets Tier 4 Final without DEF, and the vertical lift path with 2,125 lb rated capacity handles pallets and truck loading that radial small-frames struggle with.

Engine

74 hp

Aux flow

20 GPM

Weight

9,182 lbs

A ground-up redesign of the TL8, this mid-frame radial-lift track loader comes from the company that invented the CTL. The TL8R2's 74.3 hp Kubota V3307 avoids DEF, the reinforced undercarriage carries Takeuchi's reputation for track life, and the R2 update added a roomier quiet cab, a 5.7-inch multi-function display, creep mode for attachment work, and an available 33.8 GPM high-flow package - keeping the dig-first radial geometry that made the TL8 a favorite of dirt-moving owner-operators.

Engine

74 hp

Aux flow

18.5 GPM

Weight

9,098 lbs

Operators never climb over the attachment to get into the JCB 215T - the single-arm PowerBoom and side-entry door see to that on this small-platform vertical-lift compact track loader. A 74 hp Kohler diesel with no DPF keeps emissions hardware simple on the 2,105 lb capacity machine.

Engine

68 hp

Aux flow

17.4 GPM

Weight

8,565 lbs

Smallest of Kubota's SVL compact track loaders, the SVL65-2 pairs a 68 hp Kubota diesel with a vertical-lift path and standard self-leveling. It's the value-priced entry point to the best-selling SVL family for landscapers and property owners working in tight spaces.

Engine

67 hp

Aux flow

24.2 GPM

Weight

8,380 lbs

The New Holland C330 is a mid-size compact track loader with the patented Super Boom vertical lift and a 67 hp Perkins diesel. It delivers 3000 lbs of rated capacity in a lighter, simpler package that stays below the DEF-aftertreatment power class.

Engine

67 hp

Aux flow

21.4 GPM

Weight

8,575 lbs

Yanmar's radial-lift mid-frame track loader, and the machine that opened the brand's CTL line in 2023: 67 hp, 2,100 lb rated capacity and a torsion-axle suspended undercarriage, built at the ASV plant in Grand Rapids, Minnesota. It runs a steel-embedded rubber track, which is what separates it from the TL65RP that now sits beside it on Yanmar's Posi-Track undercarriage at slightly lower rated capacity.

Engine

70 hp

Aux flow

17.1 GPM

Weight

7,906 lbs

A 70 hp vertical-lift track loader that fills the gap between the small T450 and the 74 hp T650 in Bobcat's Classic line. It is aimed at landscapers who need track flotation and vertical lift but do not want 650-frame weight or price.

Also sold as the Manitou 2100VT

Engine

69 hp

Aux flow

23 GPM

Weight

8,865 lbs

Entry point to Gehl's vertical-lift track range, launched off the CONEXPO 2023 V/VT program to replace the radial RT215. Rated 2,100 lbs at 35% of tipping load, which is a more conservative basis than the wheeled V-series uses.

Engine

68.4 hp

Aux flow

17.4 GPM

Weight

8,631 lbs

Successor to the SVL65-2, keeping the same 68.4 hp engine, 2,100 lb rated capacity and vertical lift path while taking operator-comfort and performance features from Kubota's larger next-generation loaders. Aimed at landscapers who want the small SVL's trailerable weight with an updated operator station.

Also sold as the Yanmar TL65RP

Engine

67 hp

Aux flow

21.4 GPM

Weight

7,405 lbs

The ASV RT-65-1C is a mid-frame radial-lift Posi-Track loader with a 67.1 hp Yanmar turbo-diesel, a 2,000 lb rated capacity, and the brand's suspended rubber-track undercarriage. It's the volume seller in ASV's range - sized and priced against the Bobcat T595-class machines but built for mud, snow, and soft ground where they struggle.

Also sold as the ASV RT-65-1C

Engine

67.1 hp

Aux flow

21.4 GPM

Weight

7,405 lbs

Radial-lift mid-frame on the ASV Posi-Track undercarriage, announced August 2026 alongside five other RP and VP machines. It sits directly beside the steel-embedded TL65RS-1C at slightly lower rated capacity - 2,000 lb against 2,100 - and trades that for 9.1 mph travel and 4.2 psi ground pressure.

Also sold as the Manitou 1950RT

Engine

68 hp

Aux flow

18 GPM

Weight

8,400 lbs

Badged 'RT195 - NEW' on gehl.com, this 1,950 lb radial track loader replaced the RT185 and is now the largest radial CTL Gehl builds. Everything above it in the track range switched to vertical lift, so this is the last machine in the lineup with radial geometry and tracks.

Also sold as the New Holland C327

Engine

74 hp

Aux flow

24.2 GPM

Weight

8,270 lbs

Narrow 12.6-inch tracks and a compact footprint make the TR270B a favorite for landscapers and fencing crews working through gates and between houses. It's the small-frame radial-lift entry point to Case's B-Series compact track loader line, pairing a 74 hp FPT engine that needs no DEF with a 2,700 lb rated capacity.

Also sold as the Case TR270B

Engine

74 hp

Aux flow

24.2 GPM

Weight

8,270 lbs

Digging, grading, and dirt work rather than truck loading is where the C327's radial geometry aims. It's the sole radial-lift compact track loader in New Holland's 300 Series, pairing a 74 hp FPT diesel with 2700 lbs of rated capacity.

Engine

74 hp

Aux flow

19.4 GPM

Weight

7,350 lbs

The stiff uni-body frame design Wacker Neuson introduced in 2023 arrived on the ST27, the small-frame entry to its ST-series compact track loaders. Designed and built in Menomonee Falls, Wisconsin, it pairs a 74 hp Kohler diesel that needs no DPF with a 2,700 lb rated operating capacity and vertical lift path.

Engine

65 hp

Aux flow

17.7 GPM

Weight

7,780 lbs

A frame just over five feet wide with a 65 hp Kubota diesel inside it: the Takeuchi TL6R is the smallest compact track loader from the company that invented the category. It's built for tight-access landscaping and backyard work where full-size CTLs simply can't go.

Engine

67 hp

Aux flow

18 GPM

Weight

7,831 lbs

Cat's smallest current track loader pairs a 67 hp C2.2 CRDI with a vertical boom on a 7,831 lb frame. Landscapers and hardscape crews buy this size to get onto finished ground and through gates that stop a mid-frame CTL.

Also sold as the Manitou 1650RT

Engine

70 hp

Aux flow

18.7 GPM

Weight

8,020 lbs

IdealTrax automatic track tensioning, a 69.9 hp Yanmar diesel and a 1,650 lb rated capacity make the Gehl RT165 a value-priced alternative to the Bobcat T595/T64 class. It's a mid-frame radial-lift compact track loader built by Manitou Group and sold in identical form as the Manitou 1650 RT.

Engine

67 hp

Aux flow

18 GPM

Weight

7,434 lbs

A fully-suspended undercarriage sits under this small-frame radial-lift compact track loader. The Cat 239D3 is compact and low-ground-pressure, popular with landscapers and rental yards wanting a Cat CTL that fits tight sites.

Engine

55 hp

Aux flow

16.7 GPM

Weight

6,424 lbs

Just 55 inches wide and running 55 hp, the T450 is the smallest compact track loader in the Bobcat lineup. This radius-lift machine is built for backyard access, fenced-in jobs, and buyers who want a real steel-tracked Bobcat that a half-ton truck can still tow.

Also sold as the Yanmar TL50RP

Engine

54 hp

Aux flow

13.3 GPM

Weight

5,180 lbs

Towable behind a half-ton pickup at just 5,180 lbs, the ASV RT-50 packs a 1,400 lb rated capacity into a small-frame radial-lift Posi-Track loader. It still brings the brand's suspended undercarriage and low ground pressure to tight residential work.

Also sold as the ASV RT-50

Engine

53.8 hp

Aux flow

13.3 GPM

Weight

5,205 lbs

Top of Yanmar's three small-frame Posi-Track loaders from July 2026: 53.8 hp, 1,400 lb rated capacity and 15-inch tracks at 3.0 psi. It is the first of the three wide enough and heavy enough to work like a small mid-frame while still staying under 5,500 lb at the open-ROPS weight.

Also sold as the Manitou 1350RT

Engine

47 hp

Aux flow

17 GPM

Weight

6,510 lbs

Slotting between the gate-friendly RT105 and mid-frame RT165, the Gehl RT135 is a small-frame radial-lift compact track loader from Manitou Group, also sold as the Manitou 1350 RT. A 46.6 hp Yanmar diesel, a 1,350 lb rated capacity, and a 57-inch width aim it at the Bobcat T550/Cat 249D class.

Also sold as the Manitou 1050RT

Engine

35 hp

Aux flow

15 GPM

Weight

4,720 lbs

At 50.8 inches wide with a 34.7 hp Yanmar diesel, the Gehl RT105 targets backyard landscapers and rental fleets in the Bobcat T450/Cat 239D small-frame class. It's the smallest track loader in the Gehl line, a 4,720 lb radial-lift machine built by Manitou Group and also sold as the Manitou 1050 RT.

Also sold as the Yanmar TL40RP

Engine

38 hp

Aux flow

13.3 GPM

Weight

4,005 lbs

Sized between the gate-width RT-25 and the towable RT-50, the RT-40 puts a 931 lb rated capacity and ASV's suspended Posi-Track undercarriage on a 4,005 lb frame. It suits fencing, irrigation and landscape crews who need flotation and a pressurised cab in a machine a half-ton pickup can still tow.

Also sold as the ASV RT-40

Engine

38.2 hp

Aux flow

13.3 GPM

Weight

4,030 lbs

Second of the three small-frame Posi-Track loaders Yanmar launched in July 2026, at 38.2 hp and 930 lb rated capacity with 2,480 lb of bucket breakout force. The step up from the TL25RP is engine and hydraulics rather than footprint - it keeps the same 11-inch track and sub-4,400 lb trailering weight.

Engine

23.2 hp

Aux flow

9.9 GPM

Weight

3,951 lbs

Smallest machine Yanmar sells with a seat in it, added in July 2026 on the ASV Posi-Track undercarriage: 23.2 hp, 800 lb rated capacity and 3.2 psi ground pressure on 11-inch tracks. Aimed at landscape and utility crews working through gates and across finished ground, where a mid-frame track loader either will not fit or will not be forgiven.

Engine

25 hp

Aux flow

11.3 GPM

Weight

3,755 lbs

48 inches wide and 3,755 lbs, the ASV RT-25 is the smallest sit-in compact track loader on the market - a Posi-Track machine that fits through a standard backyard gate. It gives fencing crews, landscapers, and rental fleets a real cab-and-joysticks loader where only walk-behinds used to fit.